Mobile C-arm X-ray Machines

Mobile C-arm X-ray Machines 

Mobile C-arm X-ray systems are used for a variety of diagnostic imaging and minimally invasive surgical procedures. In the operating room (OR), they help in visualizing kidney drainage, abdominal and thoracic aortic aneurysm repair, percutaneous valve replacements, cardiac surgery, vascular surgery, gastroenterology, neuro stimulation, orthopedics, pain management and neurology procedures. 

Included in the mobile C-arm category are mini C-arms, which are smaller systems used in clinics for sports medicine, orthopedic and podiatric imaging. Features on newer mobile C-arm systems include 3-D navigation aids and image processing software to improve image quality and system capabilities.

Technical Specification :

IMAGE INTENSIFIER          

 

Image intensifying Tube                                : 9 inches, Triple Field (Imported)

Nominal Entrance Field Size                         : 23cm

Output Image Diameter                                 : 20mm

CCD Camera                                                  : High Resolution CCD Camera (Imported)

Monitor                                                           : 2 Nos.19, Monitor along with a trolley

C-ARM Mobile Stand

Rotation                                                          :  +180 Degrees

Motorized Up/Down                                      : 400mm

Horizontal Travel                                           : 200mm

Acr Orbital Movement                                   : 115 Degrees

Wig Wag                                                         :  +  12.5

 

X-ray Generator (Imported)

 

Tube Head (Monoblock)                               : 40KHz Stationary Anode Tube of focal spot 0.6mm (FLR)& 1.5mm(RAD)

Max. Voltage                                                : 100KV

Fluoroscopic mA                                          : 0.1-3mA

Radiographic mA                                          : 30mA

Invertor                                                         : AC/DC convertor for HF X-ray Generator

Mains Voltage                                               : 230V ACU + 10% 50 Hz

Max. Output Power                                       : 3.5KW